Bluetooth speaker

Bluetooth speaker


Designer:
Peter Barilla

Project Category:
Home Theater

Project Level:
Beginner

Project Time:
8-20 Hours

Project Cost:
Under $100

Project Description:
Bluetooth speaker for my daughter

Design Goals:
Home bluetooth project for my daughter, use wenge wood and spruce wood

Driver Selection:
Model: DS115-8|Part # 295-424
Model: ND20FA-6|Part # 275-030

Conclusion:
Sound is good

About the Designer:
I try make first speaker

Project Parts List:

Dayton Audio DS115-8 4″ Designer Series Woofer Speaker
Dayton Audio ND20FA-6 3/4″ Soft Dome Neodymium Tweeter

5 Comments

Add yours
    • 4
      peter b

      of course. i use 3/4 wenge wood ( from parquet :) ) and front and back it is 1in spruce wood (from steps :) ). amplifier with 4.0 bluetooth . Cabimet size w 16in , D 8 in, H 5 3/4. on the back side i have basreflex 1 1/4 ( regular pvc pipe from /home depot) long 4 7/8 (68HZ). I used the crossover from the old wall speakers but I will change for another 12db/oct.

  1. 5
    Russ

    Good day!
    Curious about the bluetooth amp you used. It has buttons there to adjust volume etc., but it looks like they’re not in use with this design. How does it work exactly?

Leave a Reply to Russ Cancel reply