$100 – $500
Amazing sounding speakers from Parts Express
Modify an already awesome existing bookshelf design for my living room theater. They needed to be changed into a front ported speaker as they live on an entertainment center shelf. The baffle was not large enough for a round port so I created a font slot-port design.
Parts Express design but I raised the height of the enclosure 1 in because I used 3/4 MDF for the top, sides and front baffle, for a more solid enclosure that didn’t require any bracing.
Parts Express with additional .22uf cap
Tips & Tricks:
I calculated the Front slot port area using a few online tools, I added the .22uf Cap per the PE Tech Talk forum.
This speaker sounds amazing for $100. The kit is simple and you don’t need to be a mast craftsman to put it together.
About the Designer:
I work on cars, motorcycles and furniture (now speakers) for fun.
Project Parts List:
|Dayton Audio DSA135-8 5″ Designer Series Aluminum Cone Woofer|
|Dayton Audio ND25FW-4 1″ Soft Dome Neodymium Tweeter with Waveguide 4 Ohm|