Dayton 12″ HO DVC Build

Dayton 12″ HO DVC Build


Designer:
Doublsmm

Project Category:
Subwoofers

Project Level:
Intermediate

Project Time:
1-8 Hours

Project Cost:
$100 – $500

Project Description:
Needed a new set of subwoofers to replace the 4 18s I had prior. I intended on being able to play much lower frequencies than I previously could, whilst maintaining a clean sound overall, these subwoofers suited my needs perfectly.

Design Goals:
To be able to play much lower frequencies than ever before.

Driver Selection:
Dayton Audio RSS315HO-44 12″ Reference HO DVC Subwoofer

Enclosure Design:
Slot Port tuned to 26hz.

Enclosure Assembly:
3/4″ MDF

Conclusion:
In conclusion these subwoofers suit my needs perfectly, very accurate and tight bass, whilst being able to play down to 20hz with ease.

About the Designer:
My name is Jack and I run a YouTube channel by the name of Doublsmm (linked below) I recently sold my subwoofers and needed something for a new build.

YouTube: https://www.youtube.com/channel/UCa5Xk3q5hEQwbCv1AHp9ZjQ

2 Comments

Add yours
  1. 1
    Jc

    ive been a sub to you and i wanted the same woofers you had, so i looked it up, and i will probably buy one but i couldnt find your plans on your channel plz help

Leave a Reply to Jc Cancel reply