Westlake TM3
Designer:
Nick Tosques
Project Category:
Loudspeakers/Cabinets
Project Level:
Intermediate
Project Time:
20+ Hours
Project Cost:
$100-$500
Project Description:
Studio monitors
Design Goals:
Tried to make a replica
Driver Selection:
Dayton Audio
Enclosure Design:
Westlake studio monitors
Crossover Design:
N/A
Tips & Tricks:
N/A
Conclusion:
Very difficult but fun project to make
About the Designer:
Small time tinkerer
Project Parts List:
| Part# | Description | Qty. |
| 295-422 | Dayton Audio DS90-8 3″ Designer Series Full-Range Driver 8 Ohm | 4 |
| 285-185 | Dayton Audio CE Series CE4876-8 2″ x 3″ Racetrack Full-Range Speaker Driver 15W 8 Ohm | 2 |
| 275-025 | Dayton Audio ND16FA-6 5/8″ Soft Dome Neodymium Tweeter | 2 |
| 300-3831 | Dayton Audio DTA-2.1BT2 100W 2.1 Class D Bluetooth Amplifier with Sub Frequency Adjustment | 1 |
Nice job Where did you get the specs. For size etc. and the trim for the tweeters and ports?
1/5 scale. all component drivers were purchased at parts express. horn and tweeter hand made.