Cappuccino’s
Designer:
Ken
Project Category:
Tower Speakers
Project Level:
Intermediate
Project Time:
8-20 Hours
Project Cost:
$100 – $500
Project Description:
Back loaded horn
Design Goals:
To have a Full range speaker with no cross overs and a back loaded horn to help with bass
Driver Selection:
4″ 4 Ohm Full Range Speaker SKU 294-1123
Enclosure Design:
Back Loaded Horn
Conclusion:
This was a woodworking challenge and a fun build
About the Designer:
Wood working and speaker building as a hobby this is my 8th pair of speakers I have built
Project Parts List:
|
Part # |
Description |
Qty |
|
294-1123 |
FaitalPRO 4FE35 4 Professional Full-Ran |
1 |
Ken, That’s some fine cabinet work. Application of plate joiner biscuits is a nod to bespoke Japanese screwless craftsmanship. I looked at the photo with one side open and noticed that most of the pieces are cut from 5-ply. But, could not recognize a reason for the, what appear to be a couple of solid panels inside. Does ply vs solid keep a better cabinet seal? Overall, very well done.