ICE 200 Amp

ICE 200 Amp


Designer:
Nick Davis

Project Category:
Amplifiers

Project Level:
Beginner

Project Time:
1-8 Hours

Project Cost:
$100 – $500

Project Description:
2 channel Ice amplifier

Design Goals:
I was looking to build a high quality 2 channel amplifier to power 4 Ohm speakers.
The speakers are on the tower speakers page
HOME >> SPEAKER PROJECTS >> TOWER / FLOOR>> DIY Stereo Towers

Driver Selection:
ICEpower 200ASC
ICEpower 200AC

Enclosure Design:
Wood with a copper sheet on the bottom and a metal mesh top.

Tips & Tricks:
There are several YouTube videos that walk you through this.

Conclusion:
The amplifier sounds great. If you can solder wires you can build this.

About the Designer:
I am an aircraft structural engineer who has always had a hobby in home and care audio that likes wood working. This combined the two perfectly.

Project Parts List:

ICEpower 200ASC Class D Audio Amplifier with Power Supply Module 1 x 200W
ICEpower 200AC Class D Audio Amplifier Module 1 x 200W
ICEpower 6277846 Signal Wiring Harness for 200ASC
ICEpower Amplifier Module 200AC Wiring Harness Kit
Amphenol ACJB-RED “D” Flange Panel Mount RCA Jack Red/Black
Amphenol ACJB-WHT “D” Flange Panel Mount RCA Jack White/Black

1 comment

Add yours
  1. 1
    James

    This is fantastic! I love the look compared to traditional metal housings. I made something similar for a small lepai board but for my ICE build I went with a more traditional housing. What are the two indicators on the front?

+ Leave a Comment