![Studio Monitors](https://projectgallery.parts-express.com/wp-content/uploads/2024/01/20240109_170118-1024x1024.jpg)
Studio Monitors
![](https://projectgallery.parts-express.com/wp-content/uploads/2024/01/20240119_114135-1024x1024.jpg)
![](https://projectgallery.parts-express.com/wp-content/uploads/2024/01/20240109_170118-1024x1024.jpg)
![](https://projectgallery.parts-express.com/wp-content/uploads/2024/01/20240119_120930-1024x1024.jpg)
![](https://projectgallery.parts-express.com/wp-content/uploads/2024/01/20231207_123617-1024x1024.jpg)
Designer:
Nick Tosques
Project Category:
Loudspeakers/Cabinets
Project Level:
Intermediate
Project Time:
20+ Hours
Project Cost:
$100-$500
Project Description:
Studio Monitors
Design Goals:
Trying to replicate the full size cabinets
Driver Selection:
HiVi C3N-III 3″ Paper Cone Full-Range Driver
Dayton Audio CE Series CE4876-8 2″ x 3″ Racetrack Full-Range 15W 8 ohm
Dayton Audio ND16FA-6 5/8″ Soft Dome Neodymium Tweeter
Enclosure Design:
N/A
Crossover Design:
N/A
Tips & Tricks:
N/A
Conclusion:
Turned out to be quite difficult to make but it all worked out,
About the Designer:
Small time enthusiast living in the past
Project Parts List:
Part # | Description | Qty. |
297-714 | HiVi C3N-III 3″ Paper Cone Full-Range Driver | 4 |
285-185 | Dayton Audio CE Series CE4876-8 2″ x 3″ Racetrack Full-Range 15W 8 ohm | 2 |
275-025 | Dayton Audio ND16FA-6 5/8″ Soft Dome Neodymium Tweeter | 2 |
+ There are no comments
Add yours