Blast Box 200 Watt Portable Bluetooth Speaker Kit

Blast Box 200 Watt Portable Bluetooth Speaker Kit


Designer:
Tom Wilson

Project Category:
Portable Speakers

Project Level:
Beginner

Project Time:
1-8 Hours

Project Cost:
$100 – $500

Project Description:
Great Portable Sound

Design Goals:
Clean, simple execution

Driver Selection:
Stock drivers from PE kit Part # 300-7162

Enclosure Assembly:
Easy assembly. The kit is well machined and easy to build.

Crossover Design:
Stock design from PE kit Part # 300-7162

Tips & Tricks:
Two coats black spray primer + two coats black textured metallic spray paint. I carefully cut thin black mat board to create a gasket between the clear acrylic control plate and the wood recess. Used 1/2″ extruded polystyrene corner guards. Replacement amp handle. Speaker grilles. Rubber feet.

Conclusion:
Very good kit, fun to build, SOUNDS AMAZING!

About the Designer:
Tinkerer, old stereo and speaker restorer, music lover.

Project Parts List:

Blast Box 200 Watt Portable Bluetooth Speaker Kit
Penn-Elcom C1823K Metal Cabinet Corner Black 3 Leg
Dayton Audio LBB-LED Red/Green LED with Switch Package for LBB-3 18650 Battery Board
Switchcraft EH35MM2PKG Stereo 3.5mm Feedthru Jack Connector Nickel with 4-40 Screws
Audtek Electronics 35SS01 3.5mm Stereo Male to Male Slim Shell Audio Cable 1 ft.

3 Comments

Add yours

Leave a Reply to Brad Cancel reply