One-Note

One-Note


Designer:
Carr

Project Category:
Portable Speakers

Project Level:
Intermediate

Project Time:
20+ Hours

Project Cost:
$100 – $500

Project Description:
This is an AC Bluetooth portable speaker.

Design Goals:
My goals were to have a portable Bluetooth speaker for my garage shop, and vacation poolside. It was to have a finished wood cabinet, with no end grain exposed using stable plywood, and solid mahogany. Also, light weight, and good SQ.

Driver Selection:
After much review, I based the design on the C-Note kit offered here.

Enclosure Design:
1/2” Mahogany plywood surfaces with solid mahogany to accommodate sealing end grain, and rounding edges. Grill retained with imbedded magnets.

Enclosure Assembly:
Plywood surfaces and mahogany strips are all splined and glued together providing self alignment during assembly, and secure joints.

Crossover Design:
C-Note design

Tips & Tricks:
This concept could be used to combine most any existing speaker kit. The C-Note was selected because of its combined size to SQ.

Conclusion:
My signal generator produced audible sound starting at 20hz to beyond anything I am capable of hearing. SQ was accomplished, as well as portability. The cabinet construction process was particularly fun for me.

About the Designer:
Retired guy working in garage workshop looking forward to next project.

Project Parts List:

C-Note MT Bookshelf Speaker Kit Pair with Knock-Down Cabinets
Dayton Audio KAB-250A 2x50W Class D Audio Amplifier Board with Bluetooth 4.0

2 Comments

Add yours

Leave a Reply to David Hall Cancel reply